H1 FY25 FINANCIAL RESULT HIGHLITS
Home Blog Page 8592

Vitamin D levels linked to weight-loss surgery outcomes

0
science indianbureaucracy
science indianbureaucracy

Summary:Low levels of vitamin D have long been identified as an unwanted hallmark of weight loss surgery, but new findings from a study of more than 930,000 patient records add to evidence that seasonal sun exposure — a key factor in the body’s natural ability to make the “sunshine vitamin” — plays a substantial role in how well people do after such operations.

Low levels of vitamin D have long been identified as an unwanted hallmark of weight loss surgery, but now findings of a new Johns Hopkins study of more than 930,000 patient records add to evidence that seasonal sun exposure — a key factor in the body’s natural ability to make the “sunshine vitamin” — plays a substantial role in how well people do after such operations.

Results of the study, published online Dec. 14 in the journal Obesity Science & Practice, reveal interplay among vitamin D status, seasons, geography and surgery outcomes, according to Leigh Peterson, Ph.D., M.H.S., a nutritionist and postdoctoral research fellow at the Johns Hopkins Center for Bariatric Surgery, who led the research.

Specifically, the researchers found that patients undergoing bariatric surgery in the United States during winter — January to March, the time of lowest vitamin D levels — fared worse than patients who had procedures in the summer. Similarly, patients having surgery in the north seemed to have more complications than those in the south.

“Sun exposure is critical in the synthesis of vitamin D, so the notion that people living in less sunny northern states may suffer from vitamin D deficiency is not surprising,” says Peterson. “What is remarkable is how closely sun exposure, vitamin D and surgical outcomes were linked.”

For the study, researchers reviewed records of more than 930,000 bariatric operations performed in the United States between 2001 and 2010. Overall, they report, post-procedural complications were rare, with fewer than 1 percent of patients developing infections. A more common outcome was spending a few extra days in the hospital, and this showed the strongest relationship with both season and geography.

The researchers found, Peterson says, a disproportionate number of those who fared worse hailed from areas north of latitude 37 degree — roughly South Carolina — than areas south of it. For example, areas north of latitude 37 degrees yielded almost 150,000 more patients with an extended length of stay — more than three days in the hospital — after surgery than areas south of that latitude. Considering that more than 300,000 of the operations, or over one-third of the total in the study, led to extended hospitalization, 71 percent of these surgical complications occurred north of 37 degrees.

Furthermore, the researchers noticed, adverse outcomes, such as nonhealing wounds, wound infections, wound separation and delayed wound healing, clustered in colder seasons marked by less sunshine. For example, more than twice as many patients experienced delayed wound-healing complications in the winter — 349 patients, or 0.16 percent of operations reviewed — than in the summer — 172 patients, or 0.07 percent of operations reviewed.

The investigators caution that this observational study using medical records has limitations, and it is not enough to recommend the routine use of vitamin D supplements as a strategy to prevent or reduce the risk of postsurgical complications. Vitamin D supplements are often prescribed after weight loss surgery because of evidence that the operations reduce the ability of the gut to absorb the nutrient.

The investigators emphasize that further research is needed to determine the appropriate pre-emptive treatment with vitamin D in patients undergoing bariatric surgery. Experts believe that most people can and should get Vitamin D from brief, regular sun exposure, a healthy diet and possibly supplementation. While it is rare, excessive vitamin D intake can cause symptoms, such as nausea, constipation, confusion and abnormal heart rhythm. However, the researchers note, obesity is a well-known risk factor for vitamin D deficiency, and patients preparing to undergo weight loss operations should be screened for it.

Bariatric surgery serves to reduce weight for obese individuals or patients with diabetes and other conditions by reducing stomach size and/or bypassing a portion of the intestines. Nearly 200,000 bariatric surgeries occur annually in the United States. Costs for the procedure vary from $15,000 to $30,000 and are frequently covered by insurance.

“The growing rates of obesity and increased popularity of bariatric surgeries mean that primary care clinicians and bariatric surgeons should consider screening their patients and correcting any confirmed vitamin D deficiency,” says Peterson.

In general, she says, nutritional deficiencies can fuel inflammation, higher infection risk and delayed wound healing.

The researchers say they are next planning a study measuring patients’ vitamin D levels before and after surgery to help determine optimal doses for supplementation.

Source:Johns Hopkins Medicine,

Indian Defence Technologies on Display at Bahrain International Airshow this Month

0
flying_high_indianbureaucracy
flying_high_indianbureaucracy

India is showcasing during the Bahrain International Airshow being held at Sakhir Airbase, Bahrain from 21-23 January 2016, its state-of-the-art airborne platforms and associated sensors and communication systems designed and developed by DRDO (Defence Research & Development Organization, Ministry of Defence, Govt of India).  DRDO, along with some of its production partners is displaying India’s strength in advanced defence technology areas, with the aim of exploring the potential of exporting these advanced systems to friendly countries in the region.

 The show will witness flying demonstration of the ‘Tejas’ the latest and state of the art Light Combat Aircraft, the ‘Four plus’ generation and highly cost effective fighter aircraft. It is noteworthy that for the first time  LCA- Tejas will be flying outside the country’s airspace at the Bahrain airshow to create history.

 Team Sarang of the Indian Air Force (IAF) will be showcasing the nation’s prowess by flying ALH Dhruv helicopter designed & developed by HAL during the Bahrain Airshow.

 The other indoor Exhibits (scale down models) of DRDO for the Bahrain International Airshow  2016  include:-

  • LCA Fighter, LCA Navy, LCA Trainer
  • NAG: Anti-Tank Guided Missile
  • HELINA: Helicopter Launched NAG Missile
  • AKASH: Surface to Air Missile System
  • HMS-X2: Compact Hull Mounted Sonar
  • ATDS-X: Advanced Torpedo Defence System
  • UWACS Micro: UWACS Test System & Simulator
  • UWACS Triton: Underwater Communication System
  • HUMTAS-X: Hull Mounted Torpedo Alert System
  • LFDS-X: Low Frequency Dunking Sonar
  • AEW&C: Air Borne Early Warning and Control System
  • ASLESHA: 3D Low Level Light Weight Radar
  • BHARANI: 2D Low Level Light Weight Radar
  • BFSR: Battle Field Surveillance Radar

Make in India: Prop up India’s $11-billion leather goods industry, Tata International

0
make in india
make in india

An emerging market like India needs to strategise business-friendly policy initiatives and campaigns. The Indian youth from all sections of the society dreams of living in a country that is progressive in all fields, and developed at par with international standards. For any nation to make valuable economic strides on a global scale, its government has to set definite and realistic goals that are achievable through systematic planning and execution.

Last year, Prime Minister Narendra Modi took over the reins of India, and embarked on a journey of inclusive development, wherein every Indian citizen would be able to realise his or her hopes and aspirations. However, the government has various economic and social challenges to tackle in a country which is soaring with aspirations and expectations. To set the ball rolling, the government has introduced various initiatives and policy campaigns, most of which are highly appreciated by the industry and also the general public.

Out of the many initiatives put forth, the one that stands out promisingly is the ‘Make in India’ campaign launched in September 2014. The primary aim of ‘Make in India’ is to turn India into a manufacturing powerhouse by inviting global manufacturers to invest in India and increase the country’s Gross Domestic Product (GDP).

In order to fulfil its aim to fast track the economy and accomplish maximum growth, through ‘Make in India’, the government aims to eliminate unnecessary regulations, shorten bureaucratic processes, upgrade infrastructure, open up sectors to foreign direct investment (FDI), and most importantly, wants to be seen as a true business partner. These steps could actually fulfil the ‘ease-of-doing’ business philosophy and help solve the problems of the leather industry.

Over 25 sectors have been identified to be a part of the ‘Make in India’ campaign. The leather industry also finds itself listed among these sectors that are imperative to spruce up India’s GDP growth. One of the primary targets set under this initiative is to enhance the turnover of this industry from the current $12 billion (nearly Rs 79,392 crore) to $27 billion (Rs 1.78 lakh crore) by 2020. If this works, it will provide employment for an estimated six million people.

India is the second largest producer of leather footwear and garments in the world. It makes for 10% of the world’s leather production and close to 80% of the business of this industry comes from SMEs, which are an important segment of this sector. Manufacturing is a core function of the Indian leather industry, which stands strong at $11 billion (nearly Rs 72,776 crore) and has a significant share in the overall exports of the country. Indian leather goods’ exports are projected to grow 24% per annum over the next five years.

Moreover, leather and leather product manufacturing is a labour intensive industry. The footwear sector predominantly employs women and has the potential for considerable expansion. If ‘Make in India’ is successfully implemented, it will empower women from economically backward sections of the society.

With 55% of the employees below 35 years of age, we employ almost 2.5 million people in the country. Fuelling up manufacturing will lead to a rise in demand for more skilled hands on the deck. Thus, the leather sector could be one of the many industries that can help solve India’s unemployment woes. Though in general, things look good for the industry, there are a number of challenges that still need to be tackled.

For ‘Make in India’ to be successfully executed in the leather industry, the first thing that needs to be done is to address the numerous challenges faced by leather companies and businesses.

Tanning is a basic operation of the leather sector, however, it faces problems such as increased cost of production per unit area of finished leather due to low quality of technology in small tanneries, no specific dedicated industrial areas for leather sector in states like Tamil Nadu, which accounts for about 40% of India’s exports and has about 60% of tanning capacity. Poor capacity utilisation in most tanneries leading to higher financial cost and overheads. It is pertinent that the government is able to solve this logjam through its insightful campaign.

Other roadblocks that particularly curtail the potential of the leather footwear sector include varying levels of technology in the factories and low quality of shoes, which leaves us under the threat of shift in production to other areas or countries where wages are low and yet, the quality is maintained at the same level.

Most Indian companies work on subcontract basis – design, component selection and methods of production are given by the buyers and do not provide their own fashion collections. This problem particularly exists for women’s footwear, which comprises 63% of total footwear market in the world. However, the share of women’s footwear exports out of India’s total footwear exports is only 34%. Though companies are able to make prototypes based on ideas provided by the buyer, employing in-house skilled designers will change the game for the leather products portfolio of the country. Besides designers, there is a major man power requirement in the manufacturing sector, thus leaving a lot of scope for employment for India’s 10 million youngsters, who graduate every year.

As per a report by the National Skill Development Corporation (NSDC), although India has gradually liberalized its cumbersome compliance and documentation policies for global leather trade, it still lags behind most of the developed countries and even similarly placed developing countries. India’s cost of logistics, as a share of the GDP, is one of the highest in the world (12-13% of the GDP) compared to the developed markets (below 10% of the GDP). This is reflected in the transportation cost per kilometre, which may hamper the industry’s competitiveness as the leather is export-based and has to reach a wide retail market. The slow pace of reforms in the Indian power sector has had a specific detrimental effect on the leather industry in the form of additional cost of power back-up.

‘Make in India’ is not exactly a ‘magic solution’ but an encouraging platform for businesses to thrive, especially in tough economic times. There is no doubt that if the campaign is implemented well, it has the potential to bring in a manufacturing revolution, which the leather industry needs urgently.

Along with automobiles, construction industry faces policy risks on account of city pollution

0
ASSOCHAM_IndianBureaucracy
ASSOCHAM_IndianBureaucracy

With fast deteriorating air quality in big cities like Delhi -NCR leading to tougher regulatory norms such as the odd-even policy for private cars, the high stake construction industry along with the automobile sector should be prepared to deal with possible public outrage and must devise ways for meeting such challenges, an ASSOCHAM Paper has noted.

“There are a number of environmental concerns that impact the construction industry. These include erosion, contaminated soil, lead paint removal, air contamination by asbestos particles, disposal of hazardous material, dust control and noise level,” it said.

Mapping various policy and regulatory risks which have increased with rising environmental concerns, the paper stated these issues were also flagged by a working sub-group of the erstwhile Planning Commission.

“We have begun this exercise of sensitising various stakeholders in the construction industry since a perception is gaining ground as if unplanned construction, done in a crude and unscientific ways is among the main culprits of pollution in big cities,” ASSOCHAM Secretary General Mr. D S Rawat said.

The paper highlighted the fact India is urbanised only the extent of 31 per cent but urbanisation at a faster pace is imperative for a sustainable economic growth. The construction industry has a major role in stepping up the urban development.

“After an aborted attempt to smoothen land acquisition, any controversy on environment pollution is the last thing that the industry wants,” the ASSOCHAM said.

In the absence of planned and organised urban development, cities have witnessed mushrooming of slums which now account for a quarter of all urban housing. Mushrooming growth of slums with lack of sanitation and absence of waste disposal add to the city pollution.

“Whether we like it or not, pollution in some of the big cities is becoming unbearable and as happened in the past, the court intervention, accompanied by pressures from civil society, health activists and environmentalists would bring in tougher regulatory norms for a host of industries which should be living up to these challenges by technology innovation and going green in their approach,” the chamber said.

Except for the top 20 players, the Indian construction industry is highly fragmented, family owned, or based on individual ownership. “The process of evolving has been painfully slow and unplanned. Even a lot of construction happens in the primitive way with concrete and bricks being moved by head load. Mechanisation has crept in as projects have become large but these are only a small fraction of the construction market.

Maharashtra topples Gujarat to become most attractive investment destination-ASSOCHAM

0
ASSOCHAM_IndianBureaucracy
ASSOCHAM_IndianBureaucracy

Maharashtra has toppled Gujarat as the most sought after destination for global and domestic investors as the latter recorded least growth rate of just over two per cent amid top 21 states across India during the course of past five years, revealed a recently concluded study by apex industry body ASSOCHAM.

“Maharashtra, Gujarat and Odisha have emerged as most lucrative investment destinations as they together account for over one-fourth share (26.6 per cent) in the total outstanding investments worth over Rs 154 lakh crore attracted by various sectors from both public and private sources across major 21 states in India as on December 2014 which grew from Rs 105 lakh crore as on December 2009,” noted the study titled ‘A Comparative Analysis of Investment Pattern in States,’ conducted by The Associated Chambers of Commerce and Industry of India (ASSOCHAM).

“With a share of about 10 per cent, Maharashtra has ranked on top attracting investments worth over Rs 15 lakh crore as on December 2014 closely followed by Gujarat (9.2 per cent share), while Odisha (7.5 per cent), Karnataka (6.8 per cent) and Tamil Nadu (6.5 per cent) are other states with significant share in this regard,” highlighted the study prepared by the ASSOCHAM Economic Research Bureau (AERB).

“Investment is the key driver of productivity and sustainability that leads to development and growth making most state governments to strive to better the investment climate prevailing in their respective states to make them conducive to attract domestic and foreign investors,” said Mr D.S. Rawat, secretary general of ASSOCHAM while releasing the chamber’s study.

With investments worth over Rs 84.5 lakh crore, private sector accounted for almost 55 per cent share in total investments attracted by major 21 states across India. While investments attracted from public sector grew at a compounded annual growth rate (CAGR) of just over 11 per cent, those from private sector grew at just about five per cent during the five year period of December 2009-December 2014.

Private sector accounted for highest share of over 81 per cent in the total outstanding investments attracted by Haryana. While in Gujarat private sector accounted for 74 per cent share in total investments attracted by the state as on December 2014.

Infrastructure sector accounted for lion’s share of 64 per cent in terms of total investments made by public and private sectors (both foreign and domestic) across India followed by manufacturing (20 per cent), construction (9.5 per cent), mining (3.5 per cent) and irrigation (three per cent).

Similarly in Gujarat, infrastructure accounted for highest share of 57 per cent in total investments attracted by the western state followed by manufacturing (25 per cent), construction (13 per cent), mining (three per cent) and irrigation (two per cent) as on December 2014.

With a share of 11.5 per cent and 10 per cent, Gujarat had attracted third highest share in investments attracted by manufacturing and construction & real estate sector across India, while the state attracted fourth highest share of about eight per cent share in infrastructure sector investments.

Interestingly, share of manufacturing sector had increased by five per cent in the total investments attracted by Gujarat as on December 2009 (20 per cent). While the share of infrastructure and mining both had increased by about two per cent respectively, the share of construction and irrigation sectors had declined by six per cent and three per cent respectively, highlighted the ASSOCHAM study.

Projects with investments worth over Rs 86.5 lakh crore i.e. over 56 per cent of the total investments were under implementation or remained non-starter as on December 2014 and private sector accounted for major share (51.5 per cent) in this regard.

Maharashtra had maximum share of over 10 per cent in projects under implementation followed by Karnataka (7.4 per cent), Gujarat (7.4 per cent), Odisha (seven per cent) and Tamil Nadu (6.5 per cent).

Public sector accounted for 56 per cent share in projects that remained non-starter in Gujarat as on December 2014 which had increased from 50 per cent in 2009.

Long delays in implementation of investment projects hurts the sentiment of investors and also results in incurring of huge costs as such the government needs to have a strong plan and must prioritize cleaning up delayed projects in the form of effective implementation which would only be possible through an appropriate, target-oriented roadmap for both the clearance authority and the investors, suggested the ASSOCHAM study.

“The government needs to limit the time frame for each clearance authority and if they are unable to meet the deadline, they should be penalized,” the report said.

Inappropriate planning, change of ownership, lack of finance, lack of co-ordinance with the contractors and others have also resulted in delay in implementation which calls for strict monitoring of such activities in an appropriate manner, it added.

Research links inorganic Mercury Exposure to damaged cell processes

0
science indianbureaucracy
science indianbureaucracy

Summary:Inorganic mercury, which was previously thought to be a less harmful form of the toxic metal, is very damaging to key cell processes, new research demonstrates.

University of Georgia research has found that inorganic mercury, which was previously thought to be a less harmful form of the toxic metal, is very damaging to key cell processes.University of Georgia-ndianbureaucracy

This study is the first to compare the effects of inorganic and organic mercury compounds at the biochemical, physiological and proteomic levels in any model organism, according to the study’s lead author Stephen LaVoie, a microbiology doctoral student. Published in December in the Journal of Biological Inorganic Chemistry, the research looked at how inorganic and organic mercury affected specific molecular processes.

Inorganic mercury from the ore cinnabar was used for centuries against infections; in modern times, humans synthesized organic mercurials as antimicrobials, such as merthiolate.

“Today, most human exposure to inorganic mercury is from dental fillings, and organic mercury exposure is from methylmercury in fish,” said study co-author Anne Summers, a microbiology professor in the Franklin College of Arts and Sciences.

Organic mercury exposure is associated with neurological disease, LaVoie explained, whereas inorganic mercury is known to cause neurological, kidney and autoimmune diseases. However, the molecular basis for their distinct toxicity profiles was not understood.

Owing to concern about fish consumption, most research has emphasized organic mercury, assuming it was more toxic, LaVoie said. But comparing them on key cellular processes, he found that inorganic mercury “caused more damage at lower concentrations than organic mercury.”

For his study, LaVoie used a common lab strain of E. coli bacteria as a model cellular system. He exposed growing cells to mercury compounds and measured their reactive sulfur called thiols — essential metals and proteins that naturally bind essential metals via amino acid thiols.

“We used a fluorescent probe to detect thiols,” LaVoie said. After mercury exposure the thiols decreased more with inorganic than organic mercury. Inorganic mercury was much more efficient at removing iron from iron-dependent proteins than the best organic mercury compound tested.

“As fellow oxygen-breathing creatures, it’s important to know that inorganic mercury is more potent than organic mercury in disrupting protein-iron centers such as those we have in our own cells, ” Summers said.

“More is being learned about the bacteria in and on our bodies,” LaVoie said. “What we ingest affects them, too, and their health affects our health.”

Future work will examine the mercury resistance genes that many bacteria have and how these genes help spread antibiotic resistance genes.

Source:University of Georgia

Link between Imagery and Performance

0
science indianbureaucracy
science indianbureaucracy

Summary:Imagine standing on a basketball court, throwing the basketball and watching it arc into the net. Chances are you’ll make that shot without a problem if you’ve been practicing, according to new research.

Imagine standing on a basketball court, throwing the basketball and watching it arc into the net, followed by a soft swoosh sound.New Mexico State University -indianbureaucracy

Chances are you’ll make that shot without a problem if you’ve been practicing on the court regularly, according to research by Phillip Post, associate professor in the Kinesiology and Dance Department in the College of Education at New Mexico State University. Post is studying the link between imagery and how it impacts motor learning and sport performance. Recently, Post presented his research at an international conference at Universidad Autónoma de Chihuahua.

“Specifically, I presented research, mostly research that I conducted, on the efficacy of using imagery to enhance learning or motor performance of well-rehearsed tasks,” Post said. “The research presented suggests that imagery might be effective for enhancing learner’s skill acquisition of tasks that contain greater cognitive elements, such as tasks that require decision making or remembering a sequence or pattern, as opposed to motor elements, or tasks that require correct skill execution, like a soccer kick. However, with more experienced performers imagery appears to be effective on a range of tasks, including both motor and cognitive. In addition to this research I discussed imagery theories and how to best apply the mental skill.”

At his lab on campus, Post is exploring two different lines of research. One looks at the application of imagery, particularly looking at allowing learners to acquire new skills and seeing how mentally rehearsing a particular sports skill or motor task affects their skill acquisition of it. The other looks at how imagery enhances the performance of well-rehearsed skills.

“We look at that in terms of the mental strategy of learning and also in terms of sport performance. We also do some basic motor learning types of experiments in here to see what practice conditions facilitate skill acquisition,” Post said. “We want to apply these not only to instructional settings but also to rehab settings, where practitioners need to design practice protocols that are going to facilitate their patients’ skill acquisition skills or help them relearn skills.”

As part of his research, Post uses an anticipation timing device where participants use a ping pong paddle to time their swing as a line of light bulbs turn on, mimicking the path of a ping pong ball.

“When you try to catch a baseball or an object, you have to be able to time it so that when the object arrives to you, you have your hands up with the arrival of that particular ball or object,” Post said. “It’s pretty prominent with a lot of daily skills, things such as driving or sports. We want to be on target so that we are arriving at the location of where that ball or that object is going to be.”

Post said the device allows him to measure to the millisecond how good participants are at timing their responses. He uses three groups to conduct his research: a group that physically practices their timing, a group that images their timing and a “combo” group that prepares both physically and mentally. He also uses a control group.

“With this apparatus, we want to know can learners improve their ability to intercept a light upon its arrival at a target location,” Post said. “How does mentally rehearsing affect a participant’s ability to learn this particular task?”

Ray Delgado, an NMSU kinesiology major and Post’s undergraduate research assistant, said he became interested in the research after playing college baseball for three years.

“I was taking sports psychology with Dr. Post and he talked about the different things we’ve worked on in here. It really sparked my interest,” said Delgado, who plans to pursue a doctoral degree in physical therapy. “In the long run, this helps me see how I can apply some of these strategies in therapy to see how we can use imagery in therapy and assist the rehab process.”

Post said he hopes that in the near future, his research will help patients who have suffered a stroke or have been diagnosed with diseases such as Parkinson’s.

“We hope to run interventions or studies to help the various clinical populations reacquire tasks faster and reduce their physical therapy time,” Post said.

Robert Wood, the interim associate dean of research for the College of Education, said he’s impressed with Post’s work.

“The imagery work has many important applications, including human performance and rehabilitation,” Wood said. “I am very excited about Dr. Post’s work, not only because of the relevance to contemporary issues, but also because of the high quality of the work. We are quite fortunate to have him.”

Source:New Mexico State University (NMSU)

Powergrid Opens a new chapter in completion of Transmission System under TBCB

0
powergrid-indianbureaucracy
powergrid-indianbureaucracy

 Powergrid Vizag Transmission Limited, a wholly owned subsidiary of Power Grid Corporation of India Limited (POWERGRID), secured through Tariff Based Competitive Bidding (TBCB) process has successfully charged the 1st element of the Project: Khammam – Nagarjunasagar 400kV D/C Transmission line on 31.12.2015, within the completion schedule specified. The element is a part of the transmission system for “System Strengthening in Southern Region for import of Power from Eastern Region”.
The transmission line (about 150km) traverses the States of Telangana and Andhra Pradesh and shall facilitate inter-state exchange of power in Southern Region.

Air Marshal RKS Bhadauria takes over as Deputy Chief of the Air Staff of Indian Air Force

0
Air Marshal Bhadauria-indianbureaucracy
Air Marshal Bhadauria-indianbureaucracy

Air Marshal Rakesh Kumar Singh Bhadauria took over as Deputy Chief of the Air Staff.  He is an alumnus of the National Defence Academy and was commissioned in the IAF in June 1980.  Prior to taking over as DCAS, Air Marshal Bhadauria was Senior Air Staff Officer at  Central Air Command of IAF.

He is an Experimental Test Pilot,  Cat ‘A’ Qualified Flying Instructor and Pilot Attack Instructor with over 4200 hours of experience on over twenty five types of fighter and transport aircraft.  Air Marshal Bhadauria completed his Staff Course and Masters in Defence Studies from Command and Staff College, Bangladesh.

Spanning over more than 35 years of his career, Air Marshal Bhadauria has commanded a Jaguar Squadron and a premier Air Force base in the South Western Sector.  His important assignments include Commanding Officer of Flight Test Squadron at Aircraft & Systems Testing Establishment, Chief Test Pilot and Project Director of National Flight Test Centre on Light Combat Aircraft (LCA) project, Air Attache, Moscow and Assistant Chief of the Air Staff (Projects).  He also commanded the prestigious National Defence Academy.

Air Marshal Bhadauria is a recipient of Ati Vishisht Seva Medal and Vayu Sena Medal conferred in 2013 and 2002 respectively.

He is married to Mrs. Asha Bhadauria and is blessed with a daughter and a son.

IndianBureaucracy.com wishes the very best.

Manufacturing sector on the wane in Oct-Dec quarter ,FICCI

0
FICCI
FICCI_logo_indianbureaucracy
The revival prospects for India’s manufacturing sector in the October-December quarter seem to be weakening mainly due to a sluggish exports scenario, according to FICCI.
“The percentage of respondents expecting higher growth in the December quarter has gone down to 55% against 63% for the previous three months,” the industry chamber said. “Exports are primarily responsible for this less optimistic outlook besides domestic factors like poor demand conditions, high interest costs etc,” it added.
Responses have been drawn from 336 manufacturing units from both large and small segments with a combined annual turnover of over Rs 3.94 lakh crore.
In terms of order books, 44% respondents reported higher order books for the October-December quarter which is almost the same as that of the previous three-month period, indicating a muted demand conditions, the survey noted.
The export outlook for manufacturing followed its trajectory downwards in the third quarter, with 24% of respondents expecting higher exports in the quarter compared to 36% in the previous quarter.
In terms of investment, 68% respondents in the third quarter said they do not have any plans for capacity additions for the next six months as compared to 73-75% in the previous quarters, signalling weak private sector investments in manufacturing.
Poor demand conditions, high cost of borrowing, delayed clearances and cost escalation are likely to hit companies’ expansions plans ahead, they added.

Growth of Large Enterprises closely tied to SME Growth -Dr Arvind Panagariya

0
CII Logo
CII Logo

Speaking at the Opening Session of the Global SME Business Summit, organised by CII, Dr. Arvind Panagariya, Vice Chairman, NITI Aayog, said that enterprises with less than 20 employees comprise of 73% of employment generation in the manufacturing sector.   88% of manufacturing output however is churned out by enterprises employing greater than 20 workers. This, he opined, clearly revealed the fact that growing enterprises contribute more to the economic output as well as lead to SME growth.

Dr. Anup K Pujari, Secretary, Ministry of MSME announced that Indian MSMEs are increasingly becoming more vibrant, which has resulted in their increasing share to the country’s GDP, employment and productivity. He said that the Government is constantly working towards further enhancing the capabilities of the Indian SME sector. He added that the true victory of policy makers in the SME space will be to see these enterprises’ transition from small to large enterprises.  The Ministry of MSME is prepared to work towards this goal with support from various stakeholders.

Ms. Partricia Hewitt, Chair, UK India Business Council emphasised on the need to strengthen partnerships and enhance trade relations between the two countries. She added that it is imperative for SMEs in both country to work closely together so they can grow together. She also confirmed that UK is working with the Indian Government and some State Governments to dismantle regulations. Many UK based firms have invested in India, many with 100% FDI, and contributed to the ‘Make in India’ campaign initiated by Shri. Narendra Modi, she added.

The power of internet is also rendering its magic in the arena of business development, said Mr. Rajan Anandan, Vice-President and Managing Director, Google India. India has been ranked as the second largest country for technology start-ups which by 2020 will be pegged at the count of 10,000. It has been seen that the impact of internet on business growth and profitability is profound. It has been found that Enterprises who have braced internet for business development are able generate a particular targeted revenue 50% faster and also have up to 49% greater net income than those who are not tapping into the clout of internet.

The largest employment generators after agriculture, Indian MSMEs account for around 38% of the overall GDP, 46% of exports and provide employment opportunities for around 120 million people, mostly concentrated in rural areas. As such, they not only boost the economic performance of India but also promote social inclusiveness by contributing to rural industrialization. With the theme ‘Make in India through Global SME Partnerships’, CII organized the 12th Global SME Business Summit 2015 today in partnership with the Ministry of MSME.

ASSOCHAM asks members in NCR to do car–pooling and make Delhi’s Odd-Even Traffic Plan a grand success

0
ASSOCHAM_IndianBureaucracy
ASSOCHAM_IndianBureaucracy

Extending full support to Chief Minister Mr Arvind Kejriwal’s Odd-Even Traffic Plan to be rolled out from January 1, ASSOCHAM has approached all its 12,8000 members/associates and other common interest groups to join this initiative for making it a success so that air quality of the National Capital Region is improved immediately.

In a letter to its members in the NCR, the chamber has suggested that the companies and all other business establishments should work with their staff to make car pool plans.

“I am writing you this letter making a passionate appeal to join ASSOCHAM in extending our full support to the Delhi Government’s Odd-Even Traffic Plan to improve the air quality of the mega city. Needless to say that the city has been the worst sufferer of toxic air making us all suffer, particularly children and aged.  Under no circumstances, we should let this programme suffer a setback.

“May I request you that please encourage your staff to go in for a car-pooling on a big scale so that the number of cars on the NCR roads is reduced considerably.  The ASSOCHAM would even suggest going a step further and even involve in the progamme the women staff who are, otherwise exempted,”   Mr Sunil Kanoria said in his letter.

He said if need be, the corporates  may even tweak office timings  and give some flexibility to the staff so that they all participate in the Odd-Even Traffic Plan.

“From time to time, ASSOCHAM has been actively participating in the programmes which are of larger interest to the nation and fighting air pollution certainly deserves our utmost attention and participation”, Mr Kanoria said.